Franklin XGT-2043 - Manual (Page 6)

4
Once you have installed a book card in
your BOOKMAN, you must select which
book you want to use. Note: If you
change books in the middle of a
CrossWire game you will lose your score.
1. Turn your BOOKMAN on.
2. Press
CARD
.
These are sample books.
3. Press or to highlight the
book you want to use.
4. Press
ENTER
to select it.
Warning: Never install or remove a
book card while your BOOKMAN is
turned on. If you do, information that you
entered in its built-in book and in an in-
stalled book will be erased.
1. Turn your BOOKMAN off.
2. Turn your BOOKMAN over.
3. Align the tabs on the book
card with the notches in the
slot.
4. Press the book card down
until it snaps into place.
Installing a Book Card
➤ Removing a Book Card
Warning: When you remove a book
card to install another, information
that you have entered in the
removed book card will be erased.
Selecting a Book
➤ About Screen Illustrations
Some screen illustrations in this
User’s Guide may differ from what
you see on the actual screen. This
does not mean that your BOOK-
MAN is malfunctioning.