FELLOWES SPL 125 - Manual (Page 5)

3
Product Pr o f i l e
The SPL 95, and the SPL 125 are h e a v y-d u t y lami-
nators designed for daily office or commercial use.
In addition to processing standard pouches of every
thickness, SPL laminators take standard mounting
boards for durable point-of-sale displays. To give
professional users the precision they need, all SPL
models also offer degree-by-degree temperature adjustment and nine speed options on easy-
to-read digital displays.
Here is an overview of SPL laminator capacity, capabilities and special features:
OV E R V I E W SPL 95 SPL 125
C a p a c i t y
– Pouch width: Max.
DIN size A4 A3
centimeters (document) 26 33
inches 10-3/16 13
– Pouch thickness: Min.-Max.
microns 80-250 80-250
mils 3-10 3-10
– Paper thickness: Max.
gr 300 300
lbs 80 80
–Entry width
millimeters 3.5 3.5
inches 3/16 3/16
Warm-up time in minutes :
90° C / 194° F (lowest) 3 3
140° C / 284° F (highest) 8 8
Processing speed in cm/inch per min.
Speed 1 (lowest) 29/11 29/11
Speed 9 (highest) 90/35 90/35
Reverse mode ✔ ✔
Automatic shut off ✔ ✔
Because SPL laminators are designed to take mounting board, the entry is wide enough to
accommodate pouches containing paper much thicker than the 300 gram (80 lbs) maximum
recommended above. While filling the pouch to the limits of the entry will not damage your
machine, you may not be satisfied with the quality of the results.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
As with any electrical equipment:
• Keep it away from heat or water sources
• Plug it in near an easily accessible outlet
• Do not use it if damaged in any way
• Do not attempt to open or otherwise repair it
• Turn it off after each use, and
• Unplug it when not in use for an extended period.