HONDA AAM38693 - Manual (Page 6)

6
© 200 8 American Honda Motor Co., Inc. - All Rights Reserved.
NOTE:
• Occasionally you may see a bright spot or bright
vertical line on the displayed image. Typically,
this “smearing” effect is caused either by a
reflection of sunlight from a shiny part of your
vehicle or by a bright light source, such as the
sun or another vehicle’s high beams.
On monitor screen
Smear band
Strong
light point
Bumper
• The image displayed on the monitor is a “mirror
image,” and presents the same image as seen in
rearview or door mirrors.
• If the rear camera image is too dark or too
bright, adjust the brightness using the navigation
system’s Zoom In or Zoom Out controls.
• The camera utilizes a wide-angle lens. This
allows a wider viewing area, but also distorts
your image and makes objects appear further or
closer than they actually are. Always look behind
you when backing up.
• If the angle of the camera needs readjusting,
include a small portion of your vehicle’s bumper
to ensure that you don’t omit any portion of the
rear view area.
Using the Rear Camera System
• The camera should not be installed closer than
24” from a radio antenna, or other electronic
accessory. Interference from the accessory may
result in lines or other distortions of the image.