haier HWM50-10H - Manual (Page 2)

Names of the parts................................................................................................1
Safety precautions ............................................................................................. 2
Installation and adjustment ...................................................................................4
Preparation before washing .................................................................................8
Put in the laundries .............................................................................................. 9
Usage of the detergent ........................................................................................ 9
Use the operation buttons ................................................................................. .10
Close the top lid ................................................................................................. 14
Finish washing ....................................................................................................14
Disposal after washing .................................................................................... ...15
Trouble shooting Answer to questions........................................................ .....16
Packing list *Specification..................................................................................... ...17
Contents
1. Heating function can be selected for " Normal " , " Jeans " , " Gentle "
and " Quick " programs, but it's unavailable for " Rinse " process.
2. If heating function is selected, for water levels " 1 " or " 2 " , it begins to heat
after water reaches the set level, and begins to wash when the set temperature
is reached; for water levels
" 3 " - " 6 " , it begins to heat upon water reaching level
" 2 " , it continues water supply and gently agitates while heating to the set
temperature, then it begins normal washing; for water levels above " 6 " , the
cycle is: after water reaching level " 2 " , it begins to heat, meanwhile water
supply continues until level " 6 " , water supply stops and it continues heating to
the set temperature, then it begins to wash while water supply is resuming,
(the hot water temperature then is good for detergent active enzyme function
and for the clothes to be in an optimum detergent concentration with a good
washing effect. The subsequent washing while water supply can facilitate dirt
flushing and removing), water supply stops when reaching the set level, then it
continues to wash normally.
For high water levels, only the water amount
below level " 6 " can be heated to the set temperature, then it washes and
supplements water to the set level
3. This washing machine provides 3 temperature selections of 20 , 30 and
40 , each ranging as follows
20 5 30 5 40 5
Description of heating function