Fuel filter, Parking brake, Maintenance – HTC Z5426 User Manual
Page 42
English
-42
MAINTENANCE
Fuel Filter
Replace the line-mounted fuel filter every 100 hours
(once per season) or more regularly if it is clogged.
To replace the filter:
1. Move the hose clamps away from the filter using a
flat-nosed pliers.
2. Pull the filter loose from the hose ends.
3. Push the new filter into the hose ends. Position the
filter with the “FLOW” arrow pointing up toward the
fuel pump. If necessary, a soap solution can be
applied to the filter ends to ease mounting.
4. Move the hose clamps back toward the filter.
Parking Brake
Visually check that no damage is found on the lever,
links, or switch belonging to the parking brake.
Perform a standstill test and check that there is
sufficient braking action.
To adjust the parking brake, contact the Husqvarna
service workshop.
WARNING!
Faulty adjustment results in
reduced braking ability and can
cause an accident.
IMPORTANT INFORMATION
The machine must be absolutely standing
still when applying the parking brake.
Tire Pressures
All four tires shall have a pressure of 15 psi / 103 kPa
/1 bar.
8009-405
Fuel filter
8011-564
Tire pressures
8011-481
Parking brake