General information, For dw15-pfe1, Fig.1 fig.3 fig.2 – haier DW15-PFE1 User Manual
Page 30

29
General information
Measures must be taken to ensure that built-under and built-in units that are subsequently re-sited
as free-standing appliances cannot topple over. This can be achieved by bolting the dishwasher to
the wall or fitting it under a continuous work surface which is screwed to the adjacent cupboards.
For Switzerland only:
There are no restrictions on installing the appliance between wooden or plastic walls as part of a
fitted kitchen. If the appliance is not plugged into a wall socket, it must be connected to the mains via
a separator for all poles within the domestic wiring system. This device must have a gap of at least
3mm between open contacts, in order to conform with relevant safety regulations.
Information on comparability tests implemented in compliance with
EN 50242
Appliance loaded in accordance with standard specifications.
Example of loaded dishwasher: See Fig 1 , 2 and 3.
Capacity: 12 place settings
Comparability programme: Light wash
Rinse-aid setting: 5
Detergent: 25+5g
1
2
3
1 1 1 1 1 1
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
1
1
2
2
2
2
2
2
4
5
6
4 4 4 4 4 4 4 4
4 4
4 4
5 5 5 5 5 5 5 5
5 5
5 5
6
Fig.1
Fig.3
Fig.2
For DW15-PFE1**