Harbor Freight Tools 03733 - Manual (Page 2)

SKU 03733 PAGE 2
PRODUCT SPECIFICATIONS
Item Description
Electrical Requirements 120 Volt / 60 Hz
456 Watts / 4,480 RPM
Maximum Cutting Size Capacity 12” L x 12” W x 1-1/16” Thick
Blade Type Diamond 4” Continuous
Arbor Size 5/8”
Water Coolant Basin Capacity 5 Cups, or 40 Ounces
Saw Bevel Capacity 22.5 Degree and 45 Degree
Scale Range 0 to 7-1/2” in 1/8” Increments
(0 to 190mm in 1mm Increments)
Splash Guard Yes
Accessories Bench Stops (2)
Blade Guard (1)
Weight 9.70 Pounds
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions,
assembly, operating, inspection, maintenance and cleaning proce-
dures, parts list and assembly diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover.
Keep this manual and invoice in a safe and dry place for future refer-
ence.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas
invite injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3. STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment, and
keep out of reach of children.