HONDA GXH50 User Manual
Page 11
ENGLISH
Engine Oil
Engine Cylinder
Draining the Fuel Tank and Carburetor
DRAIN BOLT
CARBURETOR
DRAIN HOSE
DRAIN SCREW
CARBURETOR
Align the rib on the flywheel with
the notch on the fan cover.
11
Gasoline is highly flammable and explosive, and you
can be burned or seriously injured when handling
fuel.
Stop engine and keep heat, sparks, and flame away.
Wipe up spills immediately.
Place an approved gasoline container below the carburetor, and
use a funnel to avoid spilling fuel.
Change the engine oil (see page
Remove the spark plug (see page
Pour a tablespoon 5
10 cm (5
10 cc) of clean engine oil into
the cylinder.
Drain the fuel tank and carburetor.
CARBURETOR EQUIPPED WITH A DRAIN HOSE AND SCREW:
After all the fuel has drained into the container, reinstall the
drain bolt (carburetor equipped with a drain bolt type only).
Tighten the drain bolt or drain screw securely.
Reinstall the spark plug.
Pull the starter grip slowly until resistance is felt and the rib on
the flywheel aligns with the notch on the fan cover. This will
close the valves so moisture cannot enter the engine cylinder.
Return the starter grip gently.
Loosen the carburetor drain screw, then move the fuel valve to
the ON position.
CARBURETOR EQUIPPED WITH DRAIN BOLT:
Remove the carburetor drain bolt, then move the fuel valve to
the ON position.
Pull the starter grip several times to distribute the oil in the
cylinder.
Handle fuel only outdoors.
2.
1.
3.
1.
2.
3.
4.
5.
05/04/22 18:55:16 32Z4C600_011