Hawking Technology HWC54D - Manual (Page 11)

Activate Button Click “Activate” to connect to the selected profile.
3.2.1 Configure the Profile
System Configuration
Parameter Description
Profile Name Define a recognizable profile name for you to identify the different
networks.
SSID The SSID (up to 32 printable ASCII characters) is the unique
name identified in a WLAN. The ID prevents the unintentional
merging of two co-located WLANs.
You may specify a SSID for the card and then only the device with
the same SSID can interconnect to the card. If you want to add
one of the networks nearby to the profile list, pull down the menu,
all the networks nearby will be listed and you can add one of them
to the profile list.
Power Saving Mode The power saving function is only available when the network type
is in Infrastructure.
CAM(Constantly Awake Mode) – The card will always set in
active mode.
Power Saving Mode – Enable the card in the power saving mode
when it is idle.
CAM When AC Power – Select this option to automatically switch
the card from power saving mode to CAM mode while the power
of your laptop computer is supplied by the AC power but not
battery.
8