Harbor Freight Tools 93341 - Manual (Page 3)

Page 3 For technical questions, please call 1-800-444-3353. Item 93341
REV 06a
Installation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Secure the unloaded trailer with
wheel chocks (blocks) on a hard, flat surface
capable of supporting the weight of the trailer,
Trailer Spare Tire Carrier and required tools.
2. Raise the trailer tongue and secure it with two
supports, one on each side of the trailer tongue.
3. Position the Mounting Bracket (2) in the correct
location against the side of the trailer tongue.
Note: The spare tire will be located to
the side of the trailer tongue.
Note: The angled Tire Mounting Plate should be angled
upward (above) the position of the Trailer Tongue Plate.
4. Attach the Mounting Bar (1) to the Mounting
Bracket (2). Set the Mounting Bars (1)
(containing six holes) flat against the trailer
tongue so that the edges of the Mounting Bars (1)
curve out away from the trailer tongue.
5. Insert four Hex Bolts (3) through the Mounting
Plates (1) as close to the trailer tongue as possible.
Slide on Washers (8), Spring Lock
Washers (7) and thread on Nut (6).
6. Use a torque wrench to tighten
the Nuts (6) to 90 ft. lb.
7. Mount the tire on the Tire Mounting Plate with
the valve facing outward so that the tire air
pressure can be checked at any interval.
WARNING! Make certain that the tire is centered
on the Tire Carrier when mounted - see Figure 1.
8. Insert Round Head Bolts (4) up through the
Tire Mounting Plate and through the Wheel.
Thread on Nuts (5), Spring Washers (7),
and Washers (8). Securely tighten and
torque all hardware to 90 ft. lb.
Figure A
unbalanced over Carrier balanced over Carrier Tire Mounting Plate
Maintenance
Before each use, inspect the Spare Tire Carrier for its general condition. Check for loose bolts,
cracked, bent or broken parts and any other condition that may affect its safe operation.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND INSTALLATION
DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT
PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.