Hanns.G JG191A - Manual (Page 8)

First Setup
Congratulation for purchasing this monitor of high performance!
This monitor comes with the following accessories :
Video cable with 15 pin D-SUB connector.
Power Cable.
User guide book or CD-ROM.
Quick Installation
1. Connect video cable
Make sure both the monitor
and computer are powered
OFF. Connect the video cable
to the computer.
2. Connect power cord
Connect the power cord to a
properly grounded AC outlet,
then to the monitor.
4. Windows users : Setting the
Timing Mode (Resolution and
Refresh Rate)
Example: 1280 x 1024 @ 60 Hz
Resolution Right-click on the
Windows desktop > Properties >
Settings > “Desktop Area”. Set
the resolution.
Refresh Rate (vertical frequency)
See your graphic card’s user
guide for instructions.
3. Power-ON computer and
monitor
Power-ON the computer, then
Power-ON the monitor.
2
Audio Cable.