HONDA HHT31S - Manual (Page 11)

RECOMMENDED CUTTING ATTACHMENTS
9
Brush/Wood Blade Cover Installation and
Removal
1. Install the blade cover over the blade so half
the blade is covered.
To prevent the post end from interfering with
the debris shield, pull the post end away from
the blade and set it on top of the blade as
shown.
Turn the blade cover slowly until the post end
clears the debris shield.
2. Reposition the post end over the blade.
3. With the blade cover fully seated on the
blade, latch the tab over the post.
Remove the blade cover in the reverse order of
installation.
CUTTING ATTACHMENT APPLICATIONS
Your Honda trimmer servicing dealer has cutting attachments that have been designed and approved
for your trimmer and are covered by warranty. Non-Honda attachments are usually designed for
universal applications. Although aftermarket attachments may fit on your trimmer, they may not meet
factory specifications and could make your trimmer unsafe.
DEBRIS
SHIELD
BLADE
POST END
BLADE COVER
Line Size Blade Diameter
HHT25S 0.095" 9"
HHT31S 0.095" or 0.105" 9" or 10"
GRASS AND LIGHT WEEDS
OK OK OK NO
THICK WEEDS AND LIGHT BRUSH
NO NO OK NO
WOODY BRUSH, SHRUBS, SAPLINGS
NO NO NO OK