Hunter Fan PERMALIFE 30750 - Manual (Page 14)

41782-01 14
Troubleshooting
Technical Support
If you have any additional questions or problems with your Hunter air purifier, please
call 1-888-830-1326 from 8:00 am to 5:00 pm Central Time or contact us over the Internet
at www.hunterfan.com.
1. No display or operation.
2. Keypad does not work.
3. Erratic Display or
Operation.
4. Filter and/or Pre-filter
Indicator is Flashing.
5. Cleanable Filter and/or
Carbon Pre-Filter Life
Counter is flashing 0%.
6. Unit has reduced air flow
or increased noise.
Problem Solutions
• Confirm that the unit is plugged in.
• Check the installation of the front grill.
• Reset the air purifier. (See Resetting the Air Purifier
on pg. 9.)
• Key pad has been locked to prevent accidental changes
to the programs. (See Keypad Lock on pg. 8 to unlock
the key pad.)
• Reset the air purifier. (See Resetting the Air Purifier
on pg. 9.)
• The Filter and/or Pre-Filter Life Counters have reached the
estimated usage times. Check and replace or clean filters if
needed. (Refer to Filter and Pre-Filter Counters on pg. 8.)
• The Filter and/or Pre-Filter Life Counters have greatly
exceeded the estimated usage times. Replace or clean the
corresponding filters.
• The filter is clogged and should be cleaned. (Refer to
Cleaning the Filter on pg. 11.)
41782-01.pmd 6/7/05, 2:33 PM 14