Audio settings, Figure 4-16, To confi – Honeywell EQUIP HD3MDIHX User Manual
Page 63
HD3MDIH/X EQUIP Series Indoor High Resolution True Day/Night IP Dome Camera User Guide
Document 800-07361 Rev A
63
12/10
Audio Settings
The network camera supports bi-directional audio. There are two supported voice band
channels that function in full duplex mode. Connect industry-standard line level audio input
and output to the back of your camera. See
for more
information.
Audio configuration for your network camera is straightforward.
Figure 4-16
Audio Settings
To listen to or capture audio from the camera, enable the Camera to Client (PC) check box
(
). To listen to audio from the client (PC), enable the Client (PC) to
Camera check box.
This manual is related to the following products: