Health O Meter 7632 User Manual
Page 36
15
15
3.
Every new press of the “M
” button recalls one set of prior stored values.
Themost
recentmemory readings will be recalled first.
Clearing Values from Memory
1.
Press the “User
-Selection” button to select Memory Zone 1
orMemory Zone 2.
2.
Continue to press the “M
” button for approximately 5 seconds, then the data
inthe
selected memory zone will be erased automatically.
Press the “M
” button for
5seconds to clear all memory
Note: The data in both Memory Zones (Zone 1 and Zone 2) will be erased if one or
bothbatteries are removed from the battery compartment.
(Please remember to record
your previous readings [from both zones] into your Blood Pressure Log prior to
replacing the batteries.)Y
ou can also erase the memories stored in both zones
bypressing the memory recall key for more than 5 seconds.