HoMedics Automatic Blood Pressure Monitor BPA-110 User Manual

Page 25

• Do not touch cuff or monitor during measurement

procedure.

• It is suggested that you take your measurements at the

same time each day and use the same arm for consistency.

• Users should wait a minimum of 5 minutes before taking

additional measurements. More time may be necessary
depending upon your physiology.

• The measurement results that users receive are for ref-

erence only. If users have any blood pressure concerns,

please consult a physician.

• Once inflation reaches 300 mmHg, the unit will deflate

automatically for safety reasons.

• This product is not suitable for people with arrhythmias.
• This device may have difficulty determining the proper

blood pressure for users with irregular heartbeat, dia-

betes, poor circulation of blood, kidney problems, or for

users who have suffered a stroke.

CARE, MAINTENANCE & CLEANING

1. Clean the blood pressure monitor body and cuff carefully

with a slightly damp, soft cloth. Do not press. Do not wash
cuff or use chemical cleaner on it. Never use thinner, alco-
hol or petrol (gasoline) as cleaner.

2. Leaky batteries can damage the unit. Remove the batteries

when the unit will not be used for a long time.

3. If the unit is stored near freezing, allow it to acclimate to

room temperature before use.

4. This blood pressure monitor is not field service-able. You

should not use any tool to open the device nor should you