Haan QUICKPRO TS-30 - Manual (Page 16)

pg 14 877-HAAN DIRECT / 877-422-6347 www. HAANUSA.com
PROBlEM: QuickPro ™ does not heat up.
Possible Cause:
1) Power cord not firmly plugged into outlet.
2) No power in wall outlet.
Possible Solution:
1) Check plug in outlet and set plug firmly.
2) Check fuse or breaker. Replace fuse and/or reset breaker.
PROBlEM: water leaks or spits.
Possible Cause:
1) Water Reservoir is not properly in place .
2) The appliance is not hot enough.
Possible Solution:
1) Be sure that the Water Reservoir has snapped into place.
2) Allow the appliance to heat for approximately 30 seconds
(while on the Metal Resting Tray) before using.