beautypg.com

Charging the main battery, To power a terminal and charge its main battery, Mounting the chargebase – Honeywell DOLPHIN 99EX User Manual

Page 160: Charging the main battery -4, To power a terminal and charge its main battery -4, Mounting the chargebase -4, Terminal using the chargebase, see, Charging the main, Battery

background image

15 - 4

Charging the Main Battery

The base provides power to the Dolphin terminals and allows charging of
the main batteries in the terminals. The main battery of each terminal
charges in 4 hours for the standard 3.7V battery or 6 hours for the
extended 3.7V battery. The intelligent battery charging system incorpo-
rated into all Dolphin terminals prevents overcharging, which means that
Dolphin terminals may be seated in the base indefinitely without damage
to the terminals, battery packs, or the base.

To Power a Terminal and Charge its Main Battery

1.

Install the main battery pack in the termina; see

Install the Main Battery Pack

on page

2-1.

2.

Verify the base has power. If the Power/Dock LEDs are not illuminated, see

Connecting Power to

the ChargeBase

on page

15-3.

3.

Slide the Dolphin terminal into one of the four terminal wells. The the Power/Dock LED for the well
changes to green. Charging begins immediately if required by the Dolphin terminal.

Make sure the terminal is dry before placing it in the Net Base. Do NOT place a wet terminal in the Net Base!
Doing so may cause damage not covered by the warranty.

We recommend use of Honeywell Li-Ion or Li-poly battery packs. Use of any non-Honeywell battery may
result in damage not covered by the warranty.

Mounting the ChargeBase

This base should be mounted to a dry, stable surface. When choosing a location, always bear in mind
that:

• The mounting location must allow users easy access to the power connector.
• The base should be oriented so that users can easily see the LEDs.

!
!