Humminbird 531906-1EN_A - Manual (Page 18)

Open the Network Source Setup Dialog Box
The Network Source Setup dialog box displays all of the sources connected to
the network. The sources may be shared on the network or operating locally
with their connected control head.
Open the Network Source Setup Dialog Box
1. Main Menu: Press the MENU key twice. Select the Network tab.
2. Select Network Source Setup. Press the RIGHT Cursor key.
3. Status Tab: Allows you to review the selected data sources on the
network. If a source is grayed out, the source is selected, but the
network cannot detect the connection.
4. Select a Source: Review each source section in this manual to select
a data source for each control head and understand how a shared
source will affect your fishing system.
Network Source Setup Dialog Box
Status Tab
GPS Receiver
Source Tabs
If the Unit Name is changed, the
new name will be displayed here.
See Customize Unit Name.
Grayed-out Source:
The selected
transducer
connection is lost
or not found.
Temperature
sources
available from
transducers
and accessories
Selected
Sources
Column
Data
Categories
Column
12 Configuration Overview