Hitachi 4420 - Manual (Page 7)

Recommended Resolutions under Windows 9x, Windows 2000:
All the following modes work within 60-81 Khz Horizontal scan frequency range:
800x600 @ 100 Hz
1024x768 @75, 85, 100 Hz (* recommended mode : 85 Hz)
1152x864 @75, 85, 100 Hz (* recommended mode : 85 Hz)
1280x1024 @60, 70 Hz
1600x1200 @60 Hz
Also we recommend that you use -,- (negative polarity) for the modes you require to run (not
mandatory). 1280x1024 60 hz standard is -,- polarity.
To change the polarity and make other adjustments we recommend powerstrip software:
http://www.entechtaiwan.com
Monitor selection under windows 9x:
You must choose a high refresh type monitor. This is a mandatory requirement.
Under Monitor selections, choose Sony Corp G500 Multiscan to give you all high refresh
choices.
If you are using a MIRAGE video card, choose standard monitor type, SuperVGA 1600x1200.
To change the monitor type:
Start
àSettingsàControl PanelàDisplayàSettingsàAdvancedàMonitoràChange
àNextàDisplay a list of all the drivers in a specific location so you can select the Drivers you
want
àShow all Hardware àManufactures : choose Sony CorpàModels: choose Sony GDM-
500ps àNextàNextàFinish
Running the monitor on MIRAGE Video Cards:
To get video cards which run all the modes (including Cmos setup, DOS, VGA,
Games,....and high resolutions) on this monitor please visit :
www.mirage-mmc.com
Zeon PDF Driver Trial
www.zeon.com.tw
Zeon PDF Driver Trial
www.zeon.com.tw