Huawei ECHOLIFE HG520C - Manual (Page 23)

18
7.2 Interfaces and Buttons
Interface or
Button Description
POWER It is used to connect the power adapter.
LAN1–LAN4 It is used to connect to the Ethernet interface on the computer.
RESET You can press and hold the RESET button for over six seconds
to restore the default settings of the HG520c.
Note: After you restore the default settings, your customized
data is lost. Therefore, use this function with caution.
ADSL It is used to connect to the MODEM interface on the splitter.
WLAN It is used to enable or disable wireless network function quickly.
ON/OFF It is the power switch and is used to power on or power off the
HG520c.
7.3 Default Settings
Parameter Setting
IP address of the LAN interface 192.168.1.1
Subnet mask of the LAN interface 255.255.255.0
User name used for logging in to the Web-based
configuration utility admin
Password used for logging in to the Web-based
configuration utility admin
DHCP server function Enable
Wireless network function Enable
7.4 Technical Specifications
Item Specification
Power supply for the HG520c 12 V DC, 0.5 A
Power consumption ≤ 6 W