beautypg.com

Sound pressure, Sound power, Vibration, hand/arm – Hayter Mowers R53S and R53A Recycling Mower 111-2842 Rev B User Manual

Page 5: Safety and instructional decals

background image

Replace faulty silencers.

If the fuel tank has to be drained, do this outdoors.

Do not change the engine governor settings or
overspeed the engine. Operating an engine at
excessive speed can increase the hazard of personal
injury.

Be careful during adjustment of the lawn mower to
prevent entrapment of the fingers between moving
cutterblades and fixed parts of the lawn mower.

To ensure the best performance and safety,
purchase only genuine replacement parts
and accessories. Do not use

will fit

parts and

accessories; they may cause a safety hazard.

Sound Pressure

Code 448E: This unit has an equivalent continuous
A-weighted sound pressure level at the operator ear of
88 dBA, based on measurements of identical machines
per EN ISO 11201 and EN 836.

Code 449E: This unit has an equivalent continuous
A-weighted sound pressure level at the operator ear of

90 dBA, based on measurements of identical machines
per EN ISO 11201 and EN 836.

Sound Power

Code 448E: This unit has an equivalent continuous
A-weighted sound power level of 98 dBA, based on
measurements of identical machines per ISO 11094.

Code 449E: This unit has an equivalent continuous
A-weighted sound power level of 98 dBA, based on
measurements of identical machines per ISO 11094.

Vibration, Hand/arm

Code 448E: This unit does not exceed a hand/arm
vibration level of 5.13 m/s

2

, based on measurements of

identical machines per EN 1033 and EN 836.

Code 449E: This unit does not exceed a hand/arm
vibration level of 4.10 m/s

2

, based on measurements of

identical machines per EN 1033 and EN 836.

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged
decals.

104-7953

1.

Warning—read the Operator’s Manual for information on charging the battery; contains lead; do not discard.

2.

Read the Operator’s Manual.

117-4157

1.

Engine—stop

5