Keystone Slider/Casement Window Air Conditioner Owners Guide - Remote Controller - Manual (Page 10)

09
How to Use Basic Functions
ATTENTION! Before operation,
please ensure the unit is plugged
in and power is available.
AUTO Mode
SETTING TEMPERATURE
The operating temperature range for
units is 62-86°F(17-30°C ). You can
increase or decrease the set temperature
1 °F(1°C) increments.
In AUTO mode, the unit will automatically
select the COOL, FAN, or HEAT operation
based on the set temperature.
1. Press the
MODE button to select AUTO .
2. Set your desired temperature using the

or TEMP TEMP
TEMP

button.
3. Press the ON/OFF button to start the unit.
NOTE:
FAN SPEED can’t be set in AUTO mode.
COOL Mode
Basic operation
In AUTO mode, the unit will automatically
select the COOL, FAN, HEAT or DRY function
based on the set temperature.
1.
Press the MODE button to select AUTO .
2. Set your desired temperature using the

or TEMP 
button.
3. Press the ON/OFF button to start the unit.
NOTE:
FAN SPEED can’t be set in AUTO mode.
Set your desired temperature using the
TEMP or TEMP button.  
Press the ON/OFF button to start the unit.
1. Press the MODE button to select COOL
mode.
2.
3. Press FAN button to select the fan speed:
AUTO, LOW, MED or HIGH.
4.
1
3
2
4
1
3
2