Samsung BESPOKE 1.9 cu. ft. Over-the-Range Smart Microwave Oven Owners Guide - Manual (Page 10)

English - 10
SETTING THE TIME
Your microwave oven is equipped with a built-in clock. Set the clock when first installing your microwave oven and after
a power failure. The time is displayed whenever the microwave oven is not being used.
1. Press the Clock button for 3 seconds.
2. Use the number buttons to enter the current time. You need to press at least three numbers to set the clock. For
example, if the current time is 5:00, press 5, 0, 0. The display will show: 500 , press the OK button.
3. Use the Clock button to select AM / PM (Only on 12 hour mode).
4. Press the OK button.
5. A colon appears indicating that the time is set.
CHILD LOCK
The Child Lock function allows you to lock the buttons so that the microwave oven cannot be operated accidentally. The
oven can be locked at any time.
Activating/Deactivating
If you want to activate or deactivate the child lock function, press the Lock button for 3 seconds.
The display will show LoC when the oven is locked, and then re-displays the time.
SETTINGS
You can customize your new microwave oven to suit your preferences. To customize:
1. Press the number Settings button.
2. Press the number button that corresponds to the function you want to customize and then press OK button.
3. Press the number that corresponds to the option you want to set.
4. Press the OK button to set the option.
The functions, options, and corresponding number buttons are listed in the table below.
No. Function Options
1 Weight mode selected
1
2
Lbs.
Kg. (Gram)
2 Clock display control
1
2
12HR
24HR
3 Sound on/off control
1
2
Sound ON
Sound OFF
4 Remind end signal
1
2
ON
OFF
5 Daylight Saving time
1
2
ON
OFF
6 Demo mode
1
2
ON
OFF
7 Filter Reminder
1
2
ON
OFF
8 Wi-Fi
1
2
ON
OFF
Filter Reminder
The filter should be cleaned or replaced once every four months. When it is time to clean or replace the filter, the
microwave displays the “Filter” message to remind you to clean or replace the filter. To remove the message, touch the
number 0 when the microwave is in standby mode, or access Settings .
SMART CONTROL
To use the microwave oven’s Smart Control, you must download the SmartThings app to a mobile device.
Functions operated by the SmartThings app may not work smoothly if communication conditions are poor or the
microwave oven is installed in a place with a weak Wi-Fi signal.
ME4000R_ME19CB704112A_EN.indd 10 ME4000R_ME19CB704112A_EN.indd 10 10/6/2022 6:17:11 PM 10/6/2022 6:17:11 PM