Vivotek ND9542P 32-Channel 4K UHD NVR (No HDD) - Manual (Page 30)

VIVOTEK - Built with Reliability
30 - User's Manual
4. The system will automatically create volumes from the installed disk drives. The process will
take several minutes. Hard disks will be configured into single-disk volumes. You can delete
these volumes and then create RAID volumes in the Settings > Storage page.
5. An optional utility, VIVOCloud , is available through the Apple and Android App Stores. The
VIVOCloud works with a server hosted by VIVOTEK for bridging and tunneling video requests
between client devices and network cameras/CMS/NVR. The utility simplifies and facilitates
network configuration for access across the Internet.
The prerequisites for using the VIVOCloud are as follows:
1. Download and install the VIVOCloud utility to your cell phone.
2. Both the NVR and your cell phone have access to the Internet.
With this utility, you do not need to configure IP port forwarding on router or set up a DDNS
address for the NVR. You do not even need to know the IP address of the NVR. The
VIVOCloud utility automatically manages the network parameters required for making the
connection. The VIVOCloud comes with viewing and playback interfaces very similar to those
in the iViewer utility.
To connect the NVR from a cell phone using the VIVOCloud:
5-1. Click on the
VIVOCloud button on the wizard.
If you insert a hard drive later,
you should manually create a
volume via the Storage page
in the Settings window.