House of Marley Stir It Up Semi-Automatic Two-Speed Turntable with Bluetooth & USB - Manual (Page 9)

Quick Start Guide
8
ATTACHING THE DRIVE BELT
Note: The drive belt is stored underneath the aluminum
platter. Look on the under side of the platter, it will
be the black elastic band stored around the center.
• To fit the belt, lift the belt over one of the larger
holes in the platter and hook it around your finger.
• Keeping the belt looped around your finger, place the
platter on the turntable base.
• Line up the large hole with the gold colored spindle
and gently loop the belt around it. The belt should now
be around the base of the platter and the gold spindle.
The platter should be attached to the base.
• Now place the REGRIND™ silicone slip mat on the turntable.