Elo TouchSystems Elo Entuitive 3000 Series 2240L - Manual (Page 8)

Elo TouchSystems 2240L User Guide 8
Connecting the Cables to the Touchmonitor and Computer
To connect your touchmonitor to your computer and power
source:
1 Connect one end of the power cable to the connector panel and
the other end to the power outlet.
2 Connect either the USB cable OR the serial cable to the rear
panel of the monitor. Note: Do not use both. Connect the other
end to your computer.
3 Connect the video cable and/or the DVI-D cable to the rear panel
of the monitor. Tighten by turning the two thumb screws clockwise
to ensure proper grounding. Connect the other end to your
computer.
4 Connect one end of the OSD remote control box connector to
the rear panel of the monitor and the other end to your computer.
5 Press the power button to turn the monitor on.
Connector Panel on Rear Side of Monitor
Analog Video
Cable
OSD
Remote
Control
Box
Connector
(Optional)
Power Cable USB
Cable
DVI-D Cable
(not included
with some
European
models)
Serial Cable
Power
Button
LED
Status