LG ProBeam BU70QGA 7000-Lumen 4K Laser SmProjector - Manual (Page 72)

17
ENGLISH
[PM Mode]
• [Power Off(Default)]: Set the normal DC off mode.
• [Sustain Aspect Ratio]: The PC retains the Extended Display Identification Data (EDID) even when the power is off.
• [Screen Off]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), or Abnormal
Shut Down mode.
• [Screen Off Always]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), Off
Time Scheduling, or Abnormal Shut Down mode, or when there is input from the remote control’s Power button or
the Projector’s Off button.
• [Network Ready]: Projector is turned off, but you can control power internally through the network.
NOTE
• In order for the screen to switch from [Screen Off] to On status, there must be input from the remote control’s
Power or Input , or button.
[Power On Delay(0-250)]
• This feature prevents overload by implementing a power-on delay when multiple Projector sets turn on.
• You can set the delay interval in the range of 0 to 250 seconds.
[Power On Status]
• Select the operating status of the Projector when the main power has turned on.
• You can choose from among [PWR(Power On)], [STD(Standby)], and [LST(Last Status)].
• [PWR(Power On)] keep the Projector powered on when the main power has turned on.
• [STD(Standby)] switch the Projector to Standby status when the main power has turned on.
• [LST(Last Status)] switches the Projector back to its previous status.
[Wake On LAN (Networked Standby Mode)]
• Set whether to use [Wake On LAN (Networked Standby Mode)].
• You can set the feature to On or Off for each wired/wireless network.
• [Wired]: When set to [On], the [Wake On LAN (Networked Standby Mode)] feature is enabled, letting you turn the
product on remotely through a wired network.
• [Wireless]: When set to [On], the [Wake On LAN (Networked Standby Mode)] feature is enabled, letting you turn the
product on remotely through a wireless network.