Rear panel – M-AUDIO AIR 192|8 Desktop 2x4 USB Type-C Audio/MIDI Interface User Manual
Page 8
8
Rear Panel
1.
USB Port (Type C):
This connection will allow you to send audio and MIDI data to and from a
computer. Use the included USB-C-to-USB-C or USB-C-to-USB-A cables to connect the
AIR 192|8 to a computer. Connect the USB-C end of the cable by firmly pressing it into place to
ensure a strong connection is felt. The AIR 192|8 requires a USB 2.0 connection (or higher).
2.
MIDI Out:
Use the included 1/8” (3.5 mm)-to-MIDI adapter to send MIDI information to an
external device.
Important:
Do
not
connect audio devices (e.g., headphones, monitors, etc.) to this jack. Use
the included 1/8” (3.5 mm)-to-MIDI adapter to only connect MIDI devices.
3.
MIDI In:
Use the included 1/8” (3.5 mm)-to-MIDI adapter to receive MIDI information from an
external device.
Important:
Do
not
connect audio devices (e.g., headphones, monitors, etc.) to this jack. Use
the included 1/8” (3.5 mm)-to-MIDI adapter to only connect MIDI devices.
4.
RCA Outputs (1–4):
The unbalanced RCA connectors 1/2 are fed from output streams 1-2, and
are affected by the operations of the
Main Level
control, the
Direct/USB Monitoring
mix
control, and the
Direct Monitor
switch. The unbalanced RCA connectors 3/4 are fed from
output streams 3-4, and are
not
affected by the operations of the
Main Level
control, the
Direct/USB Monitoring
mix control, and the
Direct Monitor
switch.
5.
Main Outputs (1–2):
Use standard 1/4" (6.35 mm) TRS cables to connect these outputs to your
powered monitors, amplifier system, etc. The mix you hear from these outputs will be
determined by the
Monitor Mix
knob and
Direct Monitor
switch. The level of these outputs is
controlled by the
Monitor Level
knob.
6.
Combo Inputs:
Connect microphones, a guitar or bass with an active pickup, or line-level
devices to these inputs. For microphones, use an XLR or 1/4" (6.35 mm) TRS cable. For a
guitar or bass with an active pickup, use a standard 1/4" (6.35 mm) TS cable. For line-level
signals, use a 1/4" (6.35 mm) TRS cable. View the input signal levels with the
LED Meters
.
7.
Kensington Lock Slot:
You can use this Kensington lock slot to secure AIR 192|8 to a table or
other surface.