Overloud Gem Comp76 FET Compressor and Limiter Plug-In - Manual (Page 11)

OVERLOUD GEMS EQ495
EQ495
EQ495 is a high fi delity equalizer modeled after one of the best German mixer’s channel strip EQ.
Its typical usage is as bus or mastering EQ, but it also works very well as an insert e ff ect.
INPUT - Adjusts the level of the input signal.
HIGH PASS - Optionally sets a limit to the lower spectrum of frequencies.
LOW PASS - Optionally sets a limit to the higher spectrum of frequencies.
OUTPUT - Adjusts the level of the output signal. When the EQ495 settings are cutting away much of
the original signal, you can use this to bring the level up again to a normal amount.
BASS Hz - Selects the frequency to attenuate or emphasize.
BASS dB - Adjusts the amount of boost or reduction to apply to the selected bass frequency.
MID Hz - Selects the frequency to attenuate or emphasize.
MID dB - Adjusts the amount of boost or reduction to apply to the selected mid frequency.
MID BANDWIDTH - Selects the mid fi lter bandwidth from three ranges: narrow, middle and broad.
HIGH Hz - Selects the frequency to attenuate or emphasize.
HIGH dB - Adjusts the amount of boost or reduction to apply to the selected high frequency.
9