Soundweb, London blu-100, Networked signal processors – BSS Audio Soundweb London BLU-100 12x8 Signal Processor with BLU Link User Manual

Page 2

Soundweb

™

London BLU-100

bssaudio.com

Networked Signal Processors

BSS AUDIO

Ph. +1 801-566-8800

Fax +1 - 801-566-7662

T E C H N I C A L S P E C I F I C A T I O N S :

Page 2 of 2

18-0717-

Front Panel Led Indicators:

Per Input:

Signal Present, CLIP, 48V (Input only)

Other:

COM, STAT, ERR, PWR

Analog Inputs:

12 electronically balanced on Phoenix Combicon removable screw connectors

Mic/Line Inputs:

Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps

Input Impedance:

3.5k

Maximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain
CMRR:

>75dB at 1KHz

Input Noise (E.I.N.):

<-128dBu typical with 150

source

Phantom Power:

48V nominal, selectable per input

A/D Latency:

37/Fs [0.77ms@48k]

Analog Outputs:

8 electronically balanced on Phoenix/Combicon removable screw connectors

Maximum Output Level: +19dBu
Frequency Response:

20Hz-20KHz (+0.5dB/-1dB)

THD:

<0.01% 20Hz to 20KHz, +10dBu output

Dynamic Range:

108dB typical, 22Hz-22KHz unweighted

Crosstalk:

<-75dB

Output Impedance:

balanced and 20

unbalanced

D/A Latency:

29/Fs [0.60ms@48k]

Control Ports:

12 inputs and 6 outputs

Control Input Voltage:

0 to 4.5v

Control Input Impedance: 4.7k

to +5V (2-wire mode), >1M

(3-wire mode)

Logic Output Voltage:

0 or +5V unloaded

Logic Output Impedance: 440

Logic Output Current:

10mA source, 60mA sink

Watchdog Output:

Phoenix/Combicon connector for failsafe control

Opto Output Current:

14mA maximum

Withstanding Voltage:

80V maximum (Off)

Series Impedance:

220

(isolated)

Control Network:

Connectors:

RJ45 Ethernet connector

Maximum Cable Length: 100m/300ft on Category 5 cable between device and Ethernet switch

BLU link:

Connectors:

2 x RJ45 Ethernet connectors

Maximum Cable Length: 100m/300ft on Category 5e cable between devices
Max. Number of Nodes: 60
Latency:

11/Fs [0.23ms@48k]

Pass Through Latency:

4/Fs [0.08ms@48k]

Power and Dimensions:

Mains Voltage:

100-240V AC, 50/60Hz

Power Consumption:

<55VA

BTU Rating:

<188 BTU/hr

Operating Temp. Range: 0º to 45º C (32º to 113º F)
Dims: (H(U) x W x D):

1.75" (1U) x 19" x 9.0"

(45mm x 483mm x 229mm)

Weight:

6.4 lbs / 2.9 kg

BSS Audio incorporates high quality mechanical fans in some products. All mechanical fans have a limited life
expectancy. We recommend annual inspection of fans for dust occlusion and excessive noise. Fan assemblies should
be replaced after six to ten years of use. Environmental factors such as elevated temperature, dust, and smoke can
adversely affect fan life. Systems exposed to these conditions should be inspected more frequently. Fan replacement
can be performed either at the factory or by an experienced technician in the field. Please contact BSS Technical
Support for more information on purchasing replacement parts or product service.

BSS Audio has a policy of continued product improvement and accordingly reserves the right to change features and
specifications without prior notice.