Take off – Autel Robotics EVO II Dual 640T Enterprise Bundle V3 Drone with Thermal Imaging User Manual
Page 11
![background image](https://www.manualsdir.com/files/871064/content/doc011.png)
10
(2)
Press and hold the power button 3 seconds to turn on the aircraft.The
current battery level will be clearly displayed.
(1)
Start the motors by holding both command sticks for 2 seconds as
shown below.
(2)
Push the left command stick slowly upward.
11. TAKE OFF
or
NOTE:
•
The default control stick mode is mode 2. The left stick
controls the altitude and heading of the aircraft, while the
right stick controls the forward, backward and sideward
movements.
•
Before takeoff, place aircraft on a level surface, stand well
clear of the rear of the aircraft.