beautypg.com

Safety mode – LG EW5G-V Series 55" Full HD Transparent OLED Signage Display User Manual

Page 55

background image

ENGLISH

21

[Safety Mode]

[General] [Safety Mode]

Set to this function for safe performance.

[ISM Method]

If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a

feature that prevents image sticking.

[Mode]

Sets the [ISM Method] mode.

[Off]: Disable the Brightness Control function.

[Orbiter]: To prevent afterimage on the screen, the screen location moves by 4 pixels in a regular order. (This item is

inactivated when the current input is No Signal.) (It only supports the models for exterior use.)

[White Wash]: Displays a white pattern to remove image sticking.

[User Image]: Plays your photos or movies using a USB storage device.

[User Video]: Plays your photos or movies using a USB storage device.

Repeat Daily

[Off, Just 1 Time]: Select this mode and click Complete to run the ISM function immediately.

[On]: Performs the ISM function for the amount of time set in duration if the still image is maintained for the period

set in standby.

[On, with moving detection]: It only applies in the [Orbiter] mode. When the still image remains for the [StandBy]

time, the afterimage prevention function works for the [Duration] time.

[On, without moving detection]: It only applies in the [Orbiter] mode. When you tap the [DONE] button, the

afterimage prevention function immediately applies and operates continuously.

[Schedule]: Enable the ISM feature from start time to end time on the set day.

[StandBy]

You can set the period between 1 and 24 hours.

This option is available only when [Repeat] is set to [Schedule].

The ISM function is performed if the still image is maintained for the set period.

[Duration]

You can select from among 1 - 10 min / 20 min / 30 min / 60 min / 90 min / 120 min / 180 min / 240 min.

This option is available only when [Repeat] is set to [Schedule].

The ISM function is performed for the set time.

[Select Day]

You can set the date.

This option is available only when [Repeat] is set to [Schedule].