Vicoustic VicStrip (Natural Oak, 106.3 x 23.4 x 0.47", 2-Pack) - Manual (Page 5)

EN
!
Wall and ceilling surfaces should be examined prior to installation, ensuring they are clean, smooth, and dry. If you have
unpainted gypsum board surfaces, these should be primed with a drywall primer (or another material manufactured especially
for the purpose), to equalize the absorption between the gypsum board face paper, joint compound, and skin coating materials.
You should then apply the paint, and allow air circulation in order to dry the paint within the time frame specified by the paint
manufacturer. Please ensure the paint is dry before installing the panel. Make sure the room has all the necessary conditions to
receive the panels.
To ensure that you maximise the strength of the glue, don’t make any adjustments to
the panel after bonding.
Wall installation with glue - For application on masonry or concrete walls, it is recommended to apply
glue (not included).
Apply the glue on the back of the acoustic panel, according to the diagram. Place the panel on the
suitably chosen position on the wall. Once in the desired place, press it firmly against the wall.