Quantum Instruments Qflash TRIO Basic Flash for Cameras User Manual

Page 10

5. Basic Navigation

This Section explains how to maneuver your way around the Trio

The

Left (-)

and

Right (+)

buttons have two functions.

1. When a selection or setting is highlighted on the display the

Left (-)

and

Right (+)

buttons will change that selection or setting. For

example if the F/number is highlighted then the

Left (-)

and

Right (+)

buttons will adjust the F/number down or up.

2. If there is nothing highlighted on the display the

Left (-)

and

Right

(+)

buttons will change the function of the soft keys located under the

display.

The

Mode

button allows you

to change the mode of the
Trio. Pushing it will bring up
the mode change menu.

See Section 7 Choosing the
right mode

There are four soft keys
located at the bottom of
the display. These soft
keys will change
function based on flash
mode or user operation.

The

Set

button will highlight

the settings on the display.
Each time you press the Set
button it will cycle through the
available settings.

MODE
/OK

SET