Godox VING V850II Li-Ion Flash Kit - Manual (Page 13)

- 30 -
*Hi-speed sync triggering mode is not available when V850II is
mounted onto the camera.
9. Custom Function--Focus Assist Lamp
● Under poorly-lit or low-contrast
conditions, you can press < >
button to turn on the focus
assist beam in order to make it
easier to autofocus.
● The beam will automatically put
out certain seconds after the last
pop is fired. The time between the
last fire and the auto shutdown of
focus assist beam is called
No-Flash Time. The time is user
adjustable and set to 10 seconds
by default.
● Press <
> button and hold for 2
seconds to enter Custom Function.
Then press “SET” button to enter
“FC” mode. The LCD panel
displays “FC” (Auto shutdown of
focus assist lamp) and “No-Flash
Time”. Rotate Select Dial < > to
set a desired time for the flash.
Press < > button to return.
No-Flash Time Meaning
10 seconds
10 seconds after the last fire, focus assist
lamp will automatically get out.
20 seconds
20 seconds after the last fire, focus assist
lamp will automatically get out.
30 seconds
30 seconds after the last fire, focus assist
lamp will automatically get out.
10. Buzz Function
● To turn the buzz function on or off,
press <
> button and hold for 2
seconds to enter Custom Function.
● Then press “SET” button
to enter “bp” mode. The LCD
displays“ON”means buzz is turned
on while “OF” means buzz is
turned off.
● When the buzzer is turned on,
< >is shown on the LCD display.
Godox Cells II transceiver
(Optional ）
TTL wireless flash trigger
X1C /X1N (Optional ）
To avoid overheating or deteriorating the flash head during
high speed sync flash, the over-temperature protection function
will be activated automatically after 10 continuous high-speed
flashes and the ecycle time becomes 10 seconds longer.