Godox V350F Flash for Select Cameras - Manual (Page 13)

Firmware Upgrade
This flash supports firmware upgrade through the USB port. Update
information will be released on our official website.
• USB connection line is not included in this product. As the USB
port is a Micro USB socket, please use Micro USB connection line.
• As the firmware upgrade needs the support of Godox G2 software,
please download and install the "Godox G2 firmware upgrade
software" before upgrading. Then, choose the related firmware file.
• As the products needs to do firmware upgrade, please refer to
instruction manual of the newest electric version as final.
Checking the version: Press the Button and the turn
the flash on. Then, the firmware update version (e.g. Version
1.0 will read U-1.0) will be displayed on the LCD panel.
Technical Data
V350F
FUJIFILM camera
(please refer to compatible camera models)
36 (m ISO 100)
24 to 105mm
• Auto zoom (Flash coverage set automatically
to match the lens focal length and image size)
• Manual zoom
• Swinging/tilting flash head (bounce flash): 0 to 270°
horizontally and -7° to 90° vertically
1/350 to 1/20000 seconds
TTL autoflash and manual flash
Manual. FEB: ±3 stops in 1/3 stop increments
(Manual FEC can be combined.)
High-speed sync (up to 1/8000 seconds),
first-curtain sync, and second-curtain sync
Provided (up to 90 times, 90Hz)
Master, Slave, Off
3 (A, B and C)
≤ 50m
16 (1~16)
Model
Compatible Cameras
Guide No.
(1/1 output @ 105mm)
Flash Coverage
Flash Duration (t0.1)
• Exposure Control
Exposure control system
Flash exposure
compensation (FEC)
Sync mode
Multi flash
• Wireless Flash (2.4G radio transmission)
Wireless flash function
Controllable slave groups
Transmission range
(approx.)
Channels
• Auto Focus Assist Beam
Effective range (approx.)
• Power Supply
Lithium batteries
Recycle time
Full power flashes
Power saving
• Sync Triggering Mode
• Dimensions
W x H x D
Weight without battery
Weight with battery
2.4G Wireless Frequency
Range
Max. Transmitting Power
of 2.4G Wireless
Center: 0.6~4m
Periphery: 0.6~2.5m
7.2V/2000mA
0.1s~1.7s
Over 500
Power off automatically after approx. 90 seconds
of idle operation. (60 minutes if set as slave)
Hotshoe, optic triggering
150*62*38 mm
210g
290g
2413.0MHz-2464.5MHz
5dbm
- 49 - - 50 -
● Shut down the device immediately should abnormal operation be detected.
● Avoid sudden impacts and the product should be dedusted regularly.
● It is normal for the flash tube to be warm when in use. Avoid continuous flashes
if unnecessary.
● Maintenance of the flash must be performed by our authorized maintenance
department which can provide original accessories.
● This product, except consumables e.g. flash tube, is supported with a one-year
warranty.
● Unauthorized service will void the warranty.
● If the product had failures or was wetted, do not use it until it is repaired by
professionals.
● Changes made to the specifications or designs may not be reflected in this
manual.
Maintenance