Operation modes – Bolt VM-110 LED Macro Ring Light User Manual
Page 20
20
|
Operation Modes
Operation Modes
Light Mode
During Light mode, the light will be on continuously. This is ideal for seeing exactly where the light will fall, as
well as for shooting video. Press the LIGHT button to turn on the LEDs for constant lighting. The dot indicator on
the LCD will switch to Light mode.
Flash Mode
To save battery power, you can engage the flash mode so the LED turns on for approximately half a second when
the camera’s shutter is released. To engage the Flash mode, press the MODE button repeatedly until the dot
indicator on the LCD switches to Flash mode.
When switching to Flash mode from Light mode, the power level indicator may rise to a higher level. This
happens when the battery power is very low and indicates that the batteries will have a longer effective life in
Flash mode. Note that the flash mode will work only if the control unit is mounted on the camera’s hot shoe.