Lomography LomoGraflok 4x5 Instant Back - Manual (Page 7)

7
instRUCtions foR Use
BattEry installation
The LomoGraflok operates with 4 × AA batteries (4 × 1.5 V).
1. Open the Battery Door [6] by sliding the Battery Door [6] outward.
2. Insert 4 × AA fresh batteries according to the indication inside
the Battery Door [6] .
3. Slide back and close the Battery Door [6] in place.
Film installation
Use only Fujifilm Instax Wide film with LomoGraflok.
1. Open the Back Door [9] by lifting the Back Door Lock [11] .
2. Match the yellow mark on the Fujifilm Instax Wide film with the
Yellow Mark [10] inside the Film Chamber and install the film
pack.
3. Close the Back Door [9] .
4. Switch on the LomoGraflok by switching the On/Off Switch [1] .
5. Press the Film Ejection Button [2] to eject the black card of the
film pack.