Tempo NC-100 NETcat Micro - Wiring Tester for Digital Voice, Data, and Video - Manual (Page 11)

NC-100 NETcat ® Micro
11
Specifications
Dimensions: 150 mm x 70 mm x 33 mm (5.9" x 2.75" x 1.3")
Weight: 220 g (0.5 lb) (including remote unit and a typical battery)
Power Source: 9 V alkaline battery (PP3, 6LR61)
User Interface:
Display LCD: Icon and seven-segment type, mixed
Backlight: Green LED
Buttons: Four momentary contact push buttons
Environmental: Designed for use in a typical indoor environment where typical IT
equipment may be found.
Operating Temperature: 0 °C to 50 °C (32 °F to 122 °F)
Storage Temperature: -10 °C to 60 °C (14 °F to 140 °F)
Humidity: Up to 95% non-condensing
Interface Connections:
RJ45 shielded socket
RJ12 6-way socket
F-Type threaded female coaxial
Minimum Cable Length for Network Split Pair Detection: 2 m to 3 m (5 ft to 10 ft)
depending upon cable type
Pair Tracing Tones: Alternating frequencies of 577 Hz and 983 Hz are produced at three
user-selectable rates
Pair Connection Assumptions: It is assumed when testing telephone and network
cables that the allocation of pairs to circuit numbers is in accordance with TIA
standards, i.e.:
Network Mode: 1 & 2, 3 & 6, 4 & 5, 7 & 8
Telephone Mode: 1 & 6, 2 & 5, 3 & 4