Assembling the catchlight – Angler CatchLight Reflector V2 (24 x 58.5") User Manual

Page 4

Assembling the CatchLight

1. Assemble the two tubes by fitting

the pieces together. Make sure the

locking buttons fit through the holes

so the pieces are locked together.

2. Thread the tubes through the

sleeves on the top and bottom of the

reflector.

3. Thread one rod through the sleeve

at the end of the CatchLight, and

secure it to the tubes with the knobs.

4. At the zippered end, fold the fabric

and zip up the zipper about ¼ of the

way. Then thread the rod through the

zipped portion of the CatchLight and

secure it with the knobs.

5. Pull the reflector tight and zip it

closed.