Using the boom stand – Impact Combo Boom Stand (12.95') User Manual
Page 4
4
Using the Boom Stand
To use the Combo Boom as a
boom stand: Set up the stand.
Loosen the T-lock for the second
section (from the top). Loosen the
ratchet handle that controls the
angle of the boom. Lift the upper
section of the stand straight up
until the bottom of the section is
exposed. Angle the section to the
desired position and tighten the
ratchet handle.
To extend the boom arm, loosen
the topmost T-lock, pull the
section out to the desired length,
and tighten the T-lock securely.
Be sure to tighten the ratchet
handle controlling the angle of the
boom before adjusting the length
of the boom. Also, be sure to
tighten the T-lock used to adjust
the length of the boom before
adjusting the angle of the boom.