Kanto Living YUP4 2-Way Bookshelf Speakers (Matte White, Pair) - Manual (Page 11)

11
Specifications
Tweeters 1 inch Silk Dome
Woofers 4 inch Kevlar®
Nominal Impedance 4 Ohm
Amplifier Type Class D
Power Output 140 Watts Peak
Input Sensitivity 560 mV
Total Harmonic Distortion < 0.25%
Crossover System 2-way
Crossover Frequency 2.0 kHz
Frequency Response 60Hz – 20kHz
Inputs 1 x 3.5 mm stereo mini-jack AUX
1 x RCA L/R
2 x Optical (Toslink)
1 x Bluetooth® 4.0 with Qualcomm aptX
Outputs 1 x Subwoofer
1 x USB Charge Port 5 V 1.0A
Speaker Terminals Left and Right Binding Posts
Input Voltage / Frequency AC 100 V - 240 V 50/60 Hz (auto switching)
Standby Power Consumption < 0.5 W
Remote Included
Dimensions (each speaker) W 5.5”x H 8.7” x D 7.5” (140 x 220 x 190 mm)
Net Weight (Active) 6.9 lb (3.2 kg)
Net Weight (Passive) 5.5 lb (2.5 kg)
Gross Weight 16.5 lb (7.5 kg) (boxed pair)
YU4 POWERED SPEAKER SYSTEM
NOTICE: The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Kanto Distribution Inc. is under license.
NOTICE: Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qualcomm is
a trademark of Qualcomm Incorporated, registered in the United States and other countries, used
with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in
the United States and other countries, used with permission.
NOTICE: This appliance is labeled in accordance with European Directive 2002/96/
EC concerning waste electrical and electronic equipment (WEEE). This label indicates
that this product should not be disposed of with household waste. It should be
deposited at an appropriate facility to enable recovery and recycling.