Genelec G Three 2-Way Powered Bookshelf Speaker (Black, Single) - Manual (Page 4)

minimized by placing the loudspeaker clear of
reflective surfaces.
Minimum clearances
Sufficient cooling for the amplifier and
functioning of the reflex port must be ensured
if the loudspeaker is installed in a restricted
space such as a cabinet or integrated into
a wall structure. The surroundings of the
loudspeaker must always be open to the
listening room with a minimum clearance of 5
centimeters (2 in) behind, above and on both
sides of the loudspeaker. The space adjacent
to the amplifier must either be ventilated or
sufficiently large to dissipate heat so that the
ambient temperature does not rise above 35
degrees Celsius (95°F).
Mounting options
G Three, G Four and G Five offer several
mounting options: The Iso-Pod™ (Isolation
Positioner/Decoupler™) vibration insulating
table stand allows tilting the loudspeaker for
correct vertical alignment. There are three
mounting points for the Iso-Pod™ on the back
of the loudspeaker cabinet allowing vertical
and symmetrical horizontal positioning. On
the base of the loudspeaker is a 3/8” UNC
(M10 on the G Four and G Five) threaded hole
compatible with a standard microphone stand.
On the rear there are two sets of threaded holes
for Omnimount® and König & Meyer brackets.
Maintenance
No user serviceable parts are to be found
within the amplifier unit. Any maintenance or
repair of the unit should only be undertaken by
qualified service personnel.
Safety considerations
Although these products have been designed
in accordance with international safety
standards, the following warnings and cautions
should be observed to ensure safe operation
and to maintain the loudspeaker under safe
operating conditions:
• Servicing and adjustment must only be
performed by qualified service personnel.
• The loudspeaker must not be opened.
• Do not use this product with an unearthed
mains cable or an unearthed mains
connection as this may compromise
electrical safety.
• Do not expose the loudspeaker to water
or moisture. Do not place any objects
filled with liquid, such as vases on the
loudspeaker or near it.
• This loudspeaker is capable of producing
sound pressure levels in excess of 85
dB, which may cause permanent hearing
damage.
• Free flow of air behind the loudspeaker is
necessary to maintain sufficient cooling. Do
not obstruct airflow around the loudspeaker.
Note that the amplifier is not completely
disconnected from the AC mains service
unless the mains power cord is removed from
the amplifier or the mains outlet.
WARNING!
This equipment is capable of producing sound
pressure levels in excess of 85 dB, which may
cause permanent hearing damage.
Compliance to FCC rules
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
conditions:
• This device may not cause harmful
interference, and
• This device must accept any interference
received, including interference that may
cause undesired operation.
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Modifications not expressly approved by the
manufacturer could void the user’s authority to
operate the equipment under FCC rules.
Guarantee
This product is guaranteed for a period
of two years against faults in materials or
workmanship. Refer to supplier for full sales
and guarantee terms.