Important safety instructions, Preventing damage to health and accidents, Preventing damage to the product and malfunctions – Sennheiser MOMENTUM True Wireless 3 Noise-Canceling In-Ear Headphones (Graphite) User Manual
Page 2: Start
Important safety instructions
2 | MOMENTUM True Wireless 3
Important safety instructions
▷
Read this instruction manual carefully and completely before
using the product.
▷
Always include this instruction manual when passing the product
on to third parties.
▷
Do not use the product if it is obviously defective or makes loud,
unusual (whistling or beeping) noise.
▷
Only use the product in environments where
Bluetooth
® wireless
transmission is permitted.
Preventing damage to health and accidents
▷
Protect your hearing from high volume levels. Permanent
hearing damage may occur when headphones are used
at high volume levels for long periods of time. Sennheiser
headphones sound exceptionally good at low and medium volume
levels.
▷
Do not insert the earphones too deep into your ears and never
insert them without ear adapters. Always remove the earphones
slowly and carefully from your ears.
▷
The product generates stronger permanent magnetic
fields that could cause interference with cardiac pace-
makers, implanted defibrillators (ICDs) and other
implants. Always maintain a distance of at least 3.94"/10 cm
between the product component containing the magnet (earbuds
and charging case) and the cardiac pacemaker, implanted
defibrillator, or other implant.
▷
Keep the product, accessories and packaging parts out of reach
of children and pets to prevent accidents. Swallowing and chok-
ing hazard.
▷
Do not use the product in an environment that requires your spe-
cial attention (e.g. in traffic). Especially the product’s active noise
cancellation can make ambient noise inaudible or drastically
change the perception of acoustic warning signals.
Preventing damage to the product and malfunctions
▷
Always keep the product dry and do not expose it to extreme tem-
peratures (hairdryer, heater, extended exposure to sunlight, etc.)
to avoid corrosion or deformation. The normal operating tempera-
ture is from 0 °C to 40 °C/32 °F to 104 °F.
▷
To avoid loud, unusual (whistling or beeping) noise and to ensure
proper noise cancellation, do not cover the microphone openings
of the active noise cancellation circuitry located on the outside of
the earbuds.
▷
Use only attachments/accessories/spare parts supplied or rec-
ommended by Sonova Consumer Hearing.
▷
Clean the product only with a soft, dry cloth. Product parts with
ingress protection (IP protection rating) can be cleaned with a
slightly damp cloth.