Celestron 8x32 Nature DX Binoculars User Manual

Page 6

ENGLISH

To ensure a crisp, sharp image the focusing
system of the binocular must be set to
compensate for any differences in your
eyesight. This is achieved by setting the diopter
(located on the right eyepiece) before use. To
set the binocular to your eyesight follow the
instructions below.

View an object in the distance through the

binocular.

Cover the right objective lens with your hand

or the objective lens cap.

Rotate the focus wheel until the image

viewed with your left eye is clear and sharp.

Cover the left objective lens with your hand

or objective lens cap.

. Viewing the same object, adjust the diopter

ring until the image viewed with your right
eye is clear and sharp.

Your binocular is now adjusted to your eyes

and focusing on any object can now be
achieved by simply turning the focus wheel.

TIP:

Eyeglasses worn for nearsightedness should be worn when using

binoculars as you may not be able to obtain focus at infinity
without them.

Diopter Adjustment

Ring

Focus Wheel

Fig. 3

SETTING THE DIOPTER / FOCUSING

This manual is related to the following products:

10x42 Nature DX Binoculars 10x56 Nature DX Binoculars 8x32 TrailSeeker ED Binocular 10x32 TrailSeeker ED Binocular 8x32 TrailSeeker Binoculars (Black) 10x50 Ultima Porro Binoculars 10x42 Nature DX Binoculars (Black) 7x50 Cometron Binoculars 12x50 Nature DX ED Binoculars 8x42 Nature DX ED Binoculars