Aluratek ABH04F Bluetooth Wireless Stereo Headphones (White) - Manual

qsg Q10328 Copyright © 2013 Aluratek, Inc. All Rights Reserved.
aluratek.com
ABH04F
On Ear Controls
Operation
Note: The pairing mode will last 2 minutes. ABH04F will switch to the standby mode
automatically if no devices can be connected within 2 minutes.
Pairing with the transmitter such as iPhone, smartphone, and tablet:
The pairing procedure will vary depending on the actual device. Please refer to the
user guide of your device for detail instruction. The pairing procedures are as follows:
1. Make sure ABH04F is powered off.
2. Activate ABH04F pairing mode by press and hold the button for 6 seconds.
(Red and Blue LED will flash rapidly)
3. Activate your device’s Bluetooth function and set your device to search for Bluetooth
devices. Select ABH04F when it is found.
4. For transmitter with Bluetooth version 2.1, you will not need to input a code. If you
are prompted for PIN, please enter “0000”.
5. If prompted by your device to connect, please select “Yes”.
6. After connecting successfully, the blue LED will flash every 3 seconds.
Note: Please make sure the audio output is set to Bluetooth / ABH04F for audio
streaming from the device.
Tech Support & Warranty Information
Operation
Charging the battery
The battery is not fully charged and it is highly recommended that you charge ABH04F
before you begin using it.
Note: Using ABH04F “out of the box” will not harm the device. You will experience reduced battery life as the
unit will not be fully charged.
Connect the larger USB end of the provided cable to your computer / power adapter.
Connect the micro smaller micro USB end to the USB port of ABH04F. Please charge
the battery for a minimum of 6 hours. The Red LED will be on while charging. When
charging is complete, the red LED will turn Blue.
Function Operation LED Indicator
Radio and TV Interference Statement
Micro USB Charging Port
Next / Previous Track
Microphone
Answer Call / End Call /
Power ON / Power OFF /
Pair Bluetooth Device /
Play / Pause
Volume Control
Enter Pairing
Mode
Ensure ABH04F is turned OFF. Press and
hold button for 6 seconds.
Red and Blue LED
flashes rapidly
Power
On / Off
Press and hold the button until the red
LED flashes.
Red then Off
Bluetooth Wireless Stereo Headphones
Quick Start Guide
For more information, please visit: http://aluratek.com/warranty-return-policy
You can register your product online at: http://aluratek.com/product-registration
E-mail: [email protected]
Web: www.aluratek.com/support
Local (Irvine, CA): 714-586-8730
Toll free: 1-866-580-1978
Aluratek warrants this product against defect in material or workmanship
for 1 Year from the date of purchase.
If you need further assistance, please contact the Aluratek support
department for troubleshooting prior to returning this device.
WARNING!!! This equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by whatever measures may be
required to correct the interference.