Assembly instructions – Genaray Octa Softbox for Spectro LED-14 Flood Light User Manual
Page 6

Octa Softbox for SpectroLED-14 Flood Light - USER MANUAL
6
ASSEMBLY
INSTRUCTIONS
To attach the softbox to the
SpectroLED 14 Flood Light, follow these
instructions carefully. Be patient—this
setup can take several minutes.
1. Lay the fabric shell on a table or flat
surface, with the touch flaps open
and the silver interior facing up.
2. Place the light in the center of the
softbox so the light is pointing up.
3. Slide a flex rod through a sleeve along
the inner seam of the softbox.
4. Insert the end of the flex rod into
a hole at the base of the light.
ins
tr
uctions
3
4