Oben VH-R2 Tilt Head for Monopods - Manual (Page 6)

6
5. Mount Quick-Release Plate
5. Mount Camera
oPErAtIon
The VH-R2 Tilt Head is designed
with a dual-locking quick-release
latch to keep the camera securely
in place on the head.
To unlock the quick-release,
press the small latch while
pulling outward on the main
latch at the same time.
Mount the quick-release plate
to the threaded hole on the
base of your camera. The plate
utilizes a 1/4
″ -20 screw that
will fit most cameras. After
tightening the screw, fold the
thumbscrew flat against the
bottom of the quick-release plate.
After mounting the quick-release
plate to your camera, ensure that
the tilt locking knob on the VH-R2
head is securely tightened.
To mount the camera to the head,
first insert the side of the quick-
release plate that is opposite the
quick-release latch. Then, press
down on the side of the quick-
release plate nearest the quick-
release latch. The quick-release
latch will automatically lock into
place when the plate is pushed
into the groove.
4. Dual-Locking Quick Release