Godox AD600BM Witstro Manual All-In-One Outdoor Flash - Manual (Page 10)

- 39 - - 40 -
Wireless Flash Shooting: Radio (2.4G) Transmission
Wireless Multiple Flash Shooting
You can set and shoot with a different flash mode for each firing group.
● Auto Shooting with Two Slave Groups
A
B
A
B
C
● Auto Shooting with Three Slave Groups
BEEP
SLAVE
FAN
SLEEP
LIGHT
UNITS
ALT
LCD
RESET
Beeper
S1/S2 mode selection
Fan working mode
Auto power off
Backlighting time
Total number of flashes
Triggering times
LCD contrast
Parameter resetting
ON
OFF
OFF
S1
S2
OFF
AUTO
OFF
1HR
2HR
3HR
12sec
OFF
ON
OFF, 0.01~30S
NO
M mode
NO
NO
NO
M / Multi mode
M mode
M mode
2~4
1. Press < MENU > Button to enter C.Fn menu. The “ Ver x.x ” in the top-right corner refers to the software version.
2. Select the Custom Function Signs.
* Turn the Select Dial to select the Custom Function Signs.
3. Change the Setting.
* Press< SET > button and the Setting Signs are highlighted.
* Turn the Select Dial to set the desired number. Press < SET > button will confirm the settings.
4. Exit C.Fn Menu.
* Press < MENU > Button to exit.
C.Fn: Setting Custom Functions
Custom Function
Signs
Functions Setting Signs Settings & Descriptions Restrictions
0~9
NO
YES
ON
OFF
OFF
S1 mode
S2 mode
OFF
Temperature <45°: OFF
Temperature >45°: LOW FAN
Temperature >60°: HIGH FAN
OFF
Auto power off without any
operation
Off in 12 sec.
Always off
Always lighting
Can be triggered as second curtain
Use UNITS in combination with
ALT: UNITS sets the total
number of flashes; ALT sets the
triggering times before flash’s firing
10 levels
Reseting
NO
Delay flash DELAY